WS2815 LED strip — 12V, dual signal, 30/60/74/96/144 LEDs/m

Here is the Norwegian product description — paste into Shopify:

WS2815 LED Strip — 12V, Dual-signal, 30/60/74/96/144 LEDs/m

The upgraded and most robust version of addressable LED strips! The WS2815 runs on 12V which eliminates voltage drop over long distances — perfect for installations over 3 meters. The dual data signal wire means that one damaged LED never stops the rest of the strip!

⚠️ Important to know: Power supply and controller are not included — see our 12V power supplies and ESP32 WLED Controller separately!

Technical specifications:

• 💡 LED chip: SMD5050, WS2815 IC (built-in)
• ⚡ Voltage: DC 12V
• 🎨 Colors: Full color 24-bit, 256 brightness levels
• 📐 Density: 30 / 60 / 144 LEDs/m
• 👁️ Viewing angle: 120°
• 💪 Power per LED: 0.24W
• 📏 PCB width: 10mm (30/60 LEDs/m) · 12mm (144 LEDs/m)
• 🔗 Connector: 4-pin JST (red=VCC, white=GND, green=DATA)
• 🌡️ Operating temperature: -20°C to +85°C
• ⏱️ Lifespan: 50,000 hours
• ✅ Certified: CE, CCC, RoHS

Choose the right protection rating:

Choose the right density:

Why WS2815 over WS2812B:

Compatible with:

• 🌈 WLED (ESP32/ESP8266)
• 🍓 Raspberry Pi
• 🔧 Arduino, Fadecandy
• 📱 SP105E, SP107E, SP110E, K1000C

Important regarding mounting:

• ✂️ Strip can be cut at each individual LED
• 🔩 Strip is soldered together in 0.5m sections — visible solder points every half meter
• 📦 Supplied as one continuous reel without controllers/adapters

💡 Tip from us: Use Luna's power calculator (🐰 bottom right) to calculate exactly which power supply you need! Combine with our ESP32 WLED Controller and Norwegian WLED guide for a complete setup! 🌈✨