Zigbee 3.0 USB Dongle Plus — CC2652P, ZHA/Zigbee2MQTT/OpenHAB, Home Assistant

Zigbee 3.0 USB Dongle Plus — CC2652P, ZHA/Zigbee2MQTT/OpenHAB, Home Assistant

The ultimate Zigbee gateway for smart home enthusiasts! With the CC2652P chip and 20dBm amplification, you get superior range and support for up to 128 Zigbee devices — all controlled locally via Home Assistant without cloud dependence. No separate Zigbee hubs for each brand — one dongle controls everything!

Technical specifications:

• 📡 Protocol: Zigbee 3.0 / Bluetooth 5.2 / Thread
• 🔌 Connection: USB 2.0
• 💪 Chip: CC2652P1 with 20dBm output amplification
• 📶 Antenna: External SMA antenna (included)
• 🏠 Compatible with: ZHA, Zigbee2MQTT, OpenHAB
• 📏 Size: 176.5 × 24.5 × 11mm
• 🌡️ Operating temperature: -10°C to +40°C
• ⚡ Power: DC 5V, max 100mA
• 🔧 Firmware: Pre-flashed with Z-Stack 3.x.0
• 🏗️ Housing: Aluminum alloy (reduces interference)
• ✅ Certified: CE

Capacity:

• 👥 Standard: 21 direct devices
• 👥 Extended: Up to 128 devices with configuration

Compatible platforms:

Package includes:

• ✅ Zigbee 3.0 USB Dongle Plus
• ✅ External SMA antenna
• ✅ User manual

Setup in 3 steps:

1. 🔌 Plug the dongle into the USB port on your Raspberry Pi
2. 🏠 Install Zigbee2MQTT or ZHA in Home Assistant
3. 📱 Pair all your Zigbee devices and control everything locally!

Why choose this over cheaper alternatives:

• 🔋 CC2652P is the best Zigbee chip for Home Assistant
• 📶 20dBm provides twice the range of standard dongles
• 🏗️ Aluminum housing protects against interference from USB and other peripherals
• 🔒 Local control — no cloud, no subscription, no third-party dependence

Our tip: Combine with our Raspberry Pi 5, Tuya Zigbee Human Presence Sensor and ESP32 WLED Controller for a complete smart home where everything communicates — locally and securely! 🏠✨